MPT® Marine Polish/Finish provides the best protection available for your boat with little effort. There is no need to paint your boat's hull if it is protected by MPT Marine Polish/Finish. It coats with a clear, hard, smooth and mirror-like finish that will not crack, chip, peel or turn yellow. It will not harm or remove gel or clear coat. It retards barnacles, algae and salt water erosion while reducing friction. Try it on your boat hull, as well as any other non-porous surface you wish to protect (e.g. chrome, brass, stainless steel, etc. of props, rudders and motors). Available in 16 fl. oz. bottle or gallon container.
Also available as the MPT® Marine Appearance Product Kit (click here)
MPT-144 - MPT® MPT Marine Polish/Finish, 16 fl. oz. bottle - $26.95 each
MPT-144D - "Three Pack" MPT® MPT Marine Polish/Finish - $72.77 for three
MPT-146 - MPT® MPT Marine Polish/Finish, gallon container - $154.95 each
APPLICATION INSTRUCTIONS: Shake well before using. The boat surface must be clean and dry, and wax residue should be removed. We recommend using MPT Pre-Cleaner. If the surface is dull, stained, oxidized, or has recently been waxed, Pre-Cleaner must be used to ensure optimum results. Apply MPT Marine Polish/Finish sparingly. Apply to the entire boat or one section at a time. The surface should be warm (50º-90º F). Allow to dry to a haze and buff to a high gloss finish. Allow at least 4-8 hours between coats to permit curing. When finished, baking boat in the sun will bond MPT Marine Polish/Finish to the surface. The more coats applied, the greater the level of protection. Should streaking occur on darker colored boats, buff the surface with a damp cloth for easy removal.
CAUTION: Do not put MPT Marine Polish/Finish anywhere footing is required.
Please Note: These files require Adobe Acrobat Reader to view. If you do not have Adobe Acrobat Reader, go here or click the logo below to download the correct version for your computer and OS.