MPT™ Industries
MPT Products
Appearance Products
MPT Classic
MPT Argus
MPT Marine
MPT Detail
MPT® Wash
MPT® Pre-Clean
MPT® Cleanse
MPT® Condition
MPT® Appearance Kits
Motor Oil
Oil Treatments
MPT Twelve
Fuel System Cleanse
MPT Firearm
MPT Greases
MPT Industrial
MPT Products FAQ
MPT Product Guarantee
MPT® Argos Durable Carbon/PTFE Guardian Finish & MPT® Icon Extremely Durable Carbon/PTFE Finish

MPT®Icon™ Extremely Durable Carbon/PTFE Finish (click here)
and
MPT
®Argos™ Durable Carbon/PTFE Guardian Finish (click here)

Providing durable, long-lasting protection for all your prized possessions!


MPT Argos logo

Experience the outstandingly
durable, mirror-like protection of

MPT® Argos™
Durable Carbon/PTFE
Guardian Finish

Manufactured to the highest standard for durability, stone chip resistance, luster, slipperiness, and acid rain protection.

MPT Argos™ Durable Carbon/PTFE Guardian Finish provides an outstandingly durable, slippery smooth finish that will repel dirt, bugs and grime. It will also resist small stone chips after 25 coatings. MPT Argos reduces drag and creates such a slippery smooth surface that it will increase top end speed on race cars, planes and boats. Available in 16 fl. oz. bottle or gallon container.

Also available in the MPT Argos™ Appearance Product Kit (click here)

MPT-143 - MPT Argos Durable Carbon/PTFE Guardian Finish, 16 fl. oz. bottle - $99.95 ea.
MPT-143D - "Three Pack" MPT Argos Durable Carbon/PTFE Guardian Finish - $269.87 for three
MPT-151 - MPT Argos Durable Carbon/PTFE Guardian Finish, gallon container- $574.95 each

MPT-320 - 100% Cotton Terry Applicator Pad - $1.95 each
MPT-320D - "Three Pack" of 100% Cotton Terry Applicator Pads - $5.27 for three

MPT-321 - 100% Cotton Terry Buffing Towel - $1.95 each
MPT-321D - "Three Pack" of 100% Cotton Terry Buffing Towels - $5.27 for three

MPT-322 - Micro Fiber Cloth, 15” x 15” - $3.95 each
MPT-322D - "Three Pack" of Micro Fiber Cloth, 15” x 15” - $10.67 for three

Application Instructions: Shake well before using. We recommend the use of MPT Pre-Cleaner prior to the initial application to remove surface contaminants and aid in adhesion. Apply sparingly with a cotton or sponge applicator pad. Allow to dry to a haze before buffing with a 100% cotton or micro fiber cloth. For ease of application and removal, complete small areas before moving on to the next section. When fully complete, park vehicle in direct sunlight to accelerate curing. Heat lamps may also be used. Allow a minimum of four hours (eight or more is preferred) between coats. For best results, apply at a minimum temperature of 75º F. The more coats applied, the deeper the gloss and the better the level of protection.

Click here for MPT® Argos™ Durable Carbon/PTFE Guardian Finish MSDS information.

Please Note: This file requires Adobe Acrobat Reader to view. If you do not have Adobe Acrobat Reader, go here or click the logo below to download the correct version for your computer and OS.
Get Adobe Acrobat

Return to the top of the page


MPT Argos logo

Experience the ultimate in exterior
non-porous surface protection with...

MPT® Icon™
Extremely Durable
Carbon/PTFE Finish

Effectively acts as a liquid paint protection film with twelve or more applications.

MPT Icon™ Extremely Durable Carbon/PTFE Finish provides provides the ultimate in exterior protection for any non-porous surface. It effectively acts as a liquid paint protection film after twelve or more applications. The highly concentrated formula provides extremely durable protection, superior gloss, and a slippery-smooth surface that will not enable anything to stick. Bugs, road tar, grease, and grime can easily be removed from the protected surfaces.

Available in 16 fl. oz. bottle or gallon container.

Also available in the MPT Icon™ Appearance Product Kit (click here)

MPT-371 - MPT Icon Extremely Durable Carbon/PTFE Finish, 16 fl. oz. bottle - $295.95 ea.
MPT-371D - "Three Pack" MPT Icon Extremely Durable Carbon/PTFE Finish - $796.50 for three
MPT-449 - MPT Icon Extremely Durable Carbon/PTFE Finish, gallon container- $1695.95 each

Application Instructions: Shake well before using. We recommend the use of MPT Pre-Cleaner prior to the initial application to remove surface contaminants and aid in adhesion. MPT Icon should be applied very sparingly with a cotton or sponge applicator pad. Allow to dry to a haze before buffing with a 100% cotton or micro fiber cloth. For ease of application and removal, complete small areas before moving on to the next section. When fully complete, park vehicle in direct sunlight to accelerate curing. Heat lamps may also be used. We recommend waiting a minimum of four to eight hours between coats for the product to cure properly. For best results, apply at a minimum temperature of 75º F. The use of heat lamps or direct sunlight will accelerate curing. The more coats applied, the deeper the gloss and the better the level of protection.


Click here for MPT Icon™ Extremely Durable Carbon/PTFE Finish MSDS information.

Please Note: This file requires Adobe Acrobat Reader to view. If you do not have Adobe Acrobat Reader, go here or click the logo below to download the correct version for your computer and OS.
Get Adobe Acrobat

Return to the top of the page


Questions, comments or suggestions? Email or send regular mail to:
MPT Industries • 6-B Hamilton Business Park • 85 Franklin Road • Dover, NJ 07801
Phone: (973) 989-9220 – Fax: (973) 989-9234

Your satisfaction is guaranteed, or your money back with proof of purchase.*

*Click the MPT Guarantee button above for more information.